Ask Experts Questions for FREE Help !
Ask
    demano's Avatar
    demano Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 30, 2013, 08:56 AM
    Long turn 90 deg.
    Does the fitting under a closet flange need to be a long turn or is a normal 90 deg. OK using 3" pvc ? Thanks for the help
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Apr 30, 2013, 10:06 AM
    Hi Demano

    It is nice when you can get a long sweep 90 under the toilet, BUT it is NOT a requirement, so a regular sweep 90 will be just fine!

    Mark
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Sin (45° x)*sin(45°-x)=1/2-sin2x [ 2 Answers ]

The task is to prove that they are equal ;)

Deg of nails [ 1 Answers ]

Can you use 21 deg nails in a 17 deg nailer?

Ice box is at 25 deg. Frig is at 60 deg. [ 0 Answers ]

I cleaned the lower coils and defosted uper coils

Can any one tell me how long do you turn dark after using benequin [ 2 Answers ]

I am turning dark by using benoquin 20% instead of getting lighter could any one help me with this

Do I need to use a wide sweep 90 deg. Elbow to turn and stub out for my sink drain li [ 4 Answers ]

Or can I use a regular 90 deg elbow? Also, I've been trying to figure out what kind of shot-off valves to use for the toilet and sinks. I'm assuming an angle valve but not sure which ones are for what type hoses. Do I need to stub out with a threaded nipple that the valve screws onto? Jeeez, so...

View more questions Search