 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kitchenaid dishwasher problem - need help
I have an old Kitchenaid dishwasher. Removed bottom panel and floor is dry - no problems down there. There is a cut in door gasket up higher but no leakage during wash cycle. When drain cycle begins, water comes out the bottom of the door and all over the floor. So no leaks when water is spraying and lots of leaks when water is being removed. Seems really backward to me. What do I need to look at fixing?
|
||||
Check out some similar questions!
I'm trying to figure out why my Kitchenaid Dishwasher, model KUDP01LBS3, is so noisy. It's just out of 10 year warranty. I tried to remove the retainer which holds the lower arm, and it won't unscrew. It just keeps turning. Is there something else I should be doing? The basic problem is that...
KitchenAid Dishwasher KUDS02FRSS1 The machine fills with water when started and the spinning arms start to spray water. After a few minutes, the washer drains and starts to make an odd humming sounds until the very end. The dishes come out with a film/stains on them like soap was dispensed but...
How do you reset a kitchenaid kudp02frss2 dishwasher?
My 577-0 model has recently started making all sorts of loud noises. Nothing clunking, rather a steady loud noise during the wash cycles. It is normal when it fills with water, and when it drains. I cleaned out all the gunk/debris and ran it empty and still same steady amount of noise. The...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
