Ask Experts Questions for FREE Help !
Ask
    glilley's Avatar
    glilley Posts: 29, Reputation: 1
    New Member
    		  
    #1

    Apr 26, 2013, 06:03 AM
    Through Wall Wiring for Stove Exhaust Fan
    Running a 14/2 w/ground through the wall where the fan unit will be mounted. Does the wire need to be enclosed in some type of cable sheath coming out of the wall or can it just come out through the hole and tie in to the fan? Thanks!
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Apr 26, 2013, 07:31 AM
    How about using a piece of Greenfield?
    glilley's Avatar
    glilley Posts: 29, Reputation: 1
    New Member
    		  
    #3

    Apr 26, 2013, 09:18 AM
    Quote Originally Posted by Stratmando View Post
    How about using a piece of Greenfield?
    Flex conduit? I can do that. Happen to even have a short piece! Thanks!
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #4

    Apr 26, 2013, 09:22 AM
    Almost all stove exhaust fan wires are run straight through the wall into the Romex connector which you can mount in the back knockout. Just make the hole a little bigger so the Romex connector fits through and tighten the nut from the inside.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring a combo Light/Exhaust Fan in Bath. [ 6 Answers ]

I removed a regular one- light ceiling fixture from my bathroom. I attempted to connect the same wires to a Nu-Tone combo exhaust fan/light. My house wiring had 1 white, 1 black and 1 bare copper. The fan had 2 whites and a blue. I twisted the 2 whites together and connected them to the house...

Replacing bathroom exhaust fan and light with different wiring [ 1 Answers ]

Replacing a bathroom exhaust fan and light , same brand , same set up,(fan,reg light and night light) newer model but the wiring is different . Old wiring from the ceiling has white, red, black and ground. New system has white, red, black and ground and a yellow wire? Where does the yellow wire go?

Wall Switch Wiring to Fan- Junction box In Fan Ovhd [ 2 Answers ]

I have an older home with a Hunter fan that stopped working. I took down the fan and noted that there were 5 sets of wires coming into the metal overhead box. Found hot black wire feed from main breaker and traced out 3 other sets that fed various outlets, overhead light in next room, etc. Final...

Wiring GFI with a switch to the exhaust fan [ 4 Answers ]

I currently have fan installed with black, white & ground into my electrical box. My main power red, black & ground is coming into the 2nd opening of my electrical box. I'm trying to figure out how to configure the wiring to have the GFI plug & switch work in tandem. The GFI Plug has 4...

Bathroom Exhaust Fan Wiring [ 2 Answers ]

I'm trying to wire an exhaust fan to an bathroom light switch; how do I go about doing this project. The existing light switch is a single pole, and I assume I will need to install another double box for two (2) switches - one for the existing light and the other for the NEW exhaust fan. ...

View more questions Search