Ask Experts Questions for FREE Help !
Ask
    Mickster144's Avatar
    Mickster144 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 26, 2013, 03:57 AM
    Uneven cut only when making sharp turns
    I have a John Deere D110 42" mower and it cuts even except when I make sharp turns, sometimes not even a sharp turn. It has done this from day one, so is this the nature of this model, being a Homedeopt model?
    Mick
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    Apr 26, 2013, 08:15 AM
    Take a look at the deck and make sure its not adjusted so in a tight turn the deck isn't shifting enough to hit a back wheel.
    smearcase's Avatar
    smearcase Posts: 2,392, Reputation: 316
    Ultra Member
    		  
    #3

    Apr 26, 2013, 12:33 PM
    Try slowing down on turns also. Centrifugal force can cause lift on the inside of the radius similar to driving your automobile too fast on a sharp road curve.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #4

    Apr 28, 2013, 01:56 PM
    Hi,
    I would also encourage you to check tire pressure. 10 psi in rear and 14 psi in front.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

HONDA ACCORD 1992 will cut on and cut off after making loud whistling sounds [ 1 Answers ]

When I turn my car on it makes this loud noise and it cuts right back off but it gets very hot fast

Uneven wood joint cut [ 2 Answers ]

I finally removed a rotten piece of trim wood. I had a hard time because of a metal Drip cap extended partial over the trim board. I used a reciprocal saw. It made An uneven cut, for the piece that was left on the house. I liked to even it off in Some way. Possibly by sanding, maybe wood...

John Deere Sabre Lawn Tractor Uneven Cut [ 4 Answers ]

I have a John Deere Sabre Lawn Tractor with a 46" mower deck. I get an uneven cut when I mow, especially when I turn the wheel. What could be causing this?

88' Chevy 1500 Stalls on sharp turns and idles rough. [ 1 Answers ]

I have an 88' Chevy 1500 truck. Lately it has idled low and kind of rough/noisy. It stalls whenever you turn the truck sharp either direction. Any ideas? It almost sounds to me like it is getting surges of power rather than a continuous equal amounts of power. Could these things be connected?...

Scraping sound when car turns sharp left [ 2 Answers ]

My car makes a scraping sound when it turns a sharp left. I went over a curb the other day. Did I damage something?

View more questions Search