 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have a rent house with 2 air conditioning units - 1 upstairs and 1 downstairs.The down stairs unit was not cooling properly and an HVAC contractor told me the air handler needs to be replaced. AHS Insurance will cover replacement of the air handler but the contractor will charge an additional...
Can someone please recommend a non-programmable digital thermostat for a heat only 24 Vac system? Normally open valve.
Polit krob will not turn to polit to light the furance what can I do to get the knob to turn?
Competent with fluke and tools. Yearly routine last year was a bug in pressure switch 200 bucks later worked fine. Can't afford tech this year. Was heating 2 weeks ago worked fine. Today changed filter, killed power, pulled and cleaned pressure switch still NOT blowing cold air. What next please?
This is not really practical to try to deliver 120 volts at 150 feet and have the capacity for 400 amps. Assuming the maximum load of each 200 amp service to be 80% of full rating, would mean the calculations would be based on 320 amps, or 160 amps for each service entrance. Thanks for your...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
