Ask Experts Questions for FREE Help !
Ask
    oldbook's Avatar
    oldbook Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Apr 20, 2013, 06:36 AM
    Lights
    Can I install 4 prewired reccesed lights in a ceiling and have the juntion boxes concealed ? Do I need to ad juntion boxes within 4 feet of the fixtures?
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Apr 20, 2013, 06:45 AM
    Define
    prewired reccesed lights.
    Junction boxes cannot be concealed.
    oldbook's Avatar
    oldbook Posts: 5, Reputation: 1
    New Member
    		  
    #3

    Apr 20, 2013, 07:26 AM
    Thank you that is what I remember so how are these lights installed?
    oldbook's Avatar
    oldbook Posts: 5, Reputation: 1
    New Member
    		  
    #4

    Apr 20, 2013, 07:36 AM
    Quote Originally Posted by hkstroud View Post
    Define

    Junction boxes cannot be concealed.
    Thank you that is what I remember. Then how are these lights installed?
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #5

    Apr 20, 2013, 07:36 AM
    so how are these lights installed?
    We would need to know what lights you are talking about to answer this. I have no idea what a pre-wired recessed light is.

    Most all recessed lights do have junction boxers that remain accessible after installation.
    oldbook's Avatar
    oldbook Posts: 5, Reputation: 1
    New Member
    		  
    #6

    Apr 20, 2013, 07:49 AM
    Quote Originally Posted by stanfortyman View Post
    We would need to know what lights you are talking about to answer this. I have no idea what a pre-wired recessed light is.

    Most all recessed lights do have junction boxers that remain accessible after installation.
    The juntionbox is on the side of the light and will be concealed after the sheetrock is installed
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #7

    Apr 20, 2013, 07:58 AM
    the juntionbox is on the side of the light and will be concealed after the sheetrock is installed
    Like I said, most all recessed lights do have junction boxers that remain accessible after installation. Aren't the cans themselves removable?
    Like I also said, we have no idea until you tell us what fixtures you are talking about.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1993 honda accord ex no tail lights, no cluster lights, no radio lights [ 1 Answers ]

Yet radio works. I have checked all the fuses with voltmeter all good. Is this a dimmer relay issue and if not what could it be. Need answer immediately please. I transport my small daughter and am unemplyed at this time. I appreciate all the help. Thank you.

No tail lights no brake lights or dash lights on a 1994 mazda b3000 [ 6 Answers ]

I own a 1994 mazda b3000 and was driving along when the dash lights went out then when I got pulled over come to find out the tail lights and brake lights don't work as well I noticed thogh the abs light flash's 12 times then pauses for a second then flash's again 12 times and so on all the fuses...

Tail lights/ Dash lights/ gear lights out in 96' infiniti G20 [ 0 Answers ]

I checked and both the fuses and blubs are fine, brake light and head lights work

Tail lights and dashboard lights not workingbut brake lights work [ 4 Answers ]

I have a 95 ponitac bonneville, when I pull the switch to turn it on, the headlights only go on. My dash and tail lights will not go on. When I press the brake my dashboard lights go on. When I release the brake the ddash goes back off. Help anyone

View more questions Search