 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Ultra wash quietguard 4 buzzed after filled
Kenmore Ultra Wash QuietGuard 4 buzzes after it fills and then just stops. Just put in a new control panel but that didn't change anything. Can't figure out which reset sequence works for model 665-17032402 Does anyone know? I've shut off the power to it; that didn't help.
|
||||
Check out some similar questions!
Reservoir door is opening, detergent is not dissolving
Our Kenmore Ultrawash quietguard 4 washes the dishes fine. However, a few inches of water stays in the bottom. Any ideas regarding what fixes to try? Thank you. (We are new home owner.. Do not know history of machine nor have any manuals).
The problem I amhaving with it is when you put it on a cycle it will run for a bit then shut off sometime it will come back on and run for a little while long 30 sec. to a min and sometimes you have to push cancel to get it to start . You have to do this all the through the cycle is there anyway...
The dishwasher gets stuck in the "washing" cycle. I've already reset it using the "heated dry then normal wash, then heated dry-normal wash". Any ideas before we give in and call Sears?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
