Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue.
[ 11 Answers ]
I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -
Lennox Heat Pump System
[ 1 Answers ]
Have a Lennox Heat Pump & Furnace. It is 7 years old and I have have 2 recent repairs on the system. This past August, the heat/cool valve was replaced because it was leaking freon. In November the control board in the furnace was replaced because the blower wouldn't come on to supply heat. Now,...
Lennox heat pump makes noise, slow condenser fan
[ 1 Answers ]
Lennox, 20r-48 heat pump ac, roof mount in Phoenix, AZ outside temp 30-65 deg f. My heat pump makes a howl noise from the condenser fan and the fan speed is slow. Condenser coils frost outside but I haven't looked at the coils this time of the year in the past due to no need, (good performance and...
Lennox Heat Pump
[ 1 Answers ]
I have a Lennox heat pump. I have measured 220VAC to the bottom of the compressor contactor. However, when I turn the thermostat to cool the blower fan comes on but the outside compressor is not energized. I can manually engage the contactor and the compressor and cooling fan come on. I can't... View more questions Search
|