Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Moen shower knob handle legend insert keeps falling off
[ 2 Answers ]
I have a single handle moen shower Clear Crystal Plastic Acrylic knob. The Legend attachment on the knob keeps falling off. The prongs are all intact. I don't think I can glue it in without compromising access to the rest of the shower parts.
MOen single knob shower faucet problems?
[ 4 Answers ]
When the knob on our Moen single-knob shower faucet is pointing at the 6 o'clock position (Which should be the "OFF" position) VERY hot water comes out at a low pressure. If the knob is turned to the 9 0'clock position, (which should be the maximum HOT position) very COLD water comes out. The...
Old moen shower knob removal...
[ 1 Answers ]
I have a moen shower control that drip leaks when off. It's a pull knob for on/off, rotate for hot/cold. Its an all chrome unit. I need to get into the wall, but I cannot figure out how to get the knob off. There is no set screw, and I've firmly messed with it, but cannot figure it out... any...
Moen shower knob
[ 1 Answers ]
How do I remover the plastic handle to look inside? There is cold water but no hot water
Moen shower knob spins
[ 5 Answers ]
Single knob moen shower spins without any change in water. The screw inside the knob cap can control the flow of water with a screwdriver but will not unscrew to remove the knob. The knob has no affect on water and just spins. Any input on how to resolve this. Thanks View more questions Search
|