Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Adding height to existing concrete slab (outdoor patio)
[ 1 Answers ]
I have read on this site the procedures for pouring new concrete over existing concrete slabs and understand the importance of making sure the new concrete adheres to the existing. Assuming the proper use of rebar, can approx. 2 inches of gravel be used on top of the existing slab to reduce the...
Adding Bathtub on concrete slab flooring
[ 2 Answers ]
Hello, I would like to add a bathtub in the room next to an existing shower room. The floor is concrete slab with no existing plumbing (it is currently a spare bedroom). Is this even possible and what sort of things should I be thinking about before I think any further!! Friends have...
Adding 40mm concrete on top of conrete slab
[ 1 Answers ]
Hi, I have a concrete house slab, and part of it 2m x 6m was originally going to be an outside verandah and has been laid 40mm lower. House plans have changed and I need to bring the lower area up to the same height as the rest of the slab in order to put the steel frame on etc. What is the...
Pouring interior concrete slab over existing, cracked concrete slab
[ 4 Answers ]
I am turning part of my carport into a new living room. I am going to pour a concrete slab about 4 inches thick over the existing carport floor which is a concrete slab. The existing slab has a few cracks, the largest of which is about an 1/8in. Wide and raised about an 1/8in. What would be the...
Adding new bath to concrete slab
[ 3 Answers ]
Hi, We just purchased a home in L.A. built in the 60s that has a concrete slab construction. We want to add on a master bath to the house but I don't know how we would tie into the plumbing lines in this kind of a foundation. Do they actually pour concrete onto the pipes when the foundation is... View more questions Search
|