Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Low hot water pressure to tub (only) after replacing hot water tank
[ 1 Answers ]
I just replaced my hot water tank and installed a new one. Now, the hot water pressure in the shower/bathtub (only) is weak - all other faucets seem normal, and the cold water in the shower is fine. Water pressure was fine before I replaced the tank, the problems with the old one were that the...
Low water pressure on hot water side in tub.
[ 1 Answers ]
I've seen several questions similar to this, but I can't find the answer I'm looking for. My house was built in the 50's or 60's, and the tub has dual faucets - hot and cold and the shower knob in the center which turns left or right. The hot water faucet over the years has leaked a lot, and it...
Low pressure in tub only for hot water
[ 2 Answers ]
I have noticed that my pressure for the bath tub is very low. Its only low with the hot water. The cold water's pressure is fine. What could possibly be the problem?
No hot water or pressure anywhere but bathroom tub
[ 1 Answers ]
I live in a mobile home that has no hot water in the kitchen or bathroom sink and has hot water at the tub, but no pressure. Everything worked fine a couple of days ago at the bathroom sink and the tub, but has been losing pressure at the tub for a while.
Hot water in tub has no pressure
[ 2 Answers ]
The hot water faucet in my tub has lost pressure. It barely lets water through. My sink is fine. My faucet is two knobs mounted to the wall, the tub spicket, and an external hand-held shower head. The name on the knobs is Rockwell. The spicket was recently replaced. View more questions Search
|