Ask Experts Questions for FREE Help !
Ask
    StevenRude's Avatar
    StevenRude Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 1, 2013, 04:23 PM
    Trane xr80
    The led is continuesly flashing. It says under the codes, normal call for heat.

    I have flipped the breaker, and turned the main switch on and off and on.

    Cleaned the fliters.

    What is my next step. Help please, it is cold
    Steven

Check out some similar questions!

Trane xr80 - I have no a/c. [ 0 Answers ]

No 24vac at thermostat, no 110vac at transformer in xr80 cabinet. Circuit breaker is OK. Where/what do I check next?

Trane xr80 [ 0 Answers ]

I have a trane xr80 the lite is off. My ac is not working either. Could it be a fuse on the outside? I took the fuse from the house to ace hardware and they tested it. It is okay. What do I look for on the outside?

Trane xr80 [ 1 Answers ]

I have a Trane xr80 that's about 5 yrs. Old. Everything starts (pr-fan-burner-ect.) but the blower never kicks on. I need help troubleshooting the blower circuits.

Trane XR80 condensation [ 2 Answers ]

We have a Trane XR80, 12 Seer rating furnace. We are experiencing excess condensation (pools of water on the floor and walls). What do we do to correct this?

Trane xr80 no code [ 1 Answers ]

Trane xr80 is blowing cold air. When first turned on, it flashed a red light once and then the light goes off.

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.