Ask Experts Questions for FREE Help !
Ask
    ehrenburt's Avatar
    ehrenburt Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 29, 2013, 12:48 PM
    Moen Shower Mixing Valve
    Can I put a Tuscany handle and backpate on an exsisting Moen mixing valve?
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Mar 29, 2013, 03:04 PM
    Are you asking about a Moen Tuscan Bronze trim kit for a shower valve? If so, it may depend on what valve you have. Does the handle pull out then turn left and right, or does the handle only turn countercloswise for cold/warm/hot? If the latter, you should be able to use the Moen Tuscan Bronze trim kit (faceplate, handle, escutcheon, shower head). They may even sell them for the pull/turn style valve.
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #3

    Mar 30, 2013, 10:11 AM
    If in doubt, call MOEN tall free number and they tell you.

    Call Moen U.S. 1-800-Buy-Moen (1-800-289-6636)
    8:00 am to 8:00 pm EST Monday through Friday
    9:00 am to 5:30 pm EST Saturday
    Closed on Sundays and all nationally observed holidays.

    Hope that helps / Milo
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Moen shower valve retaining clip for a 1225 valve [ 5 Answers ]

Can't get the clip to go in. Help please.

Shower mixing valve leaks [ 0 Answers ]

My home is 15 years old, my shower has a mixing valve. When I turn the handle to shut water the shower head leaks, no matter how hard I thighten it.

Moen shower mixing valve [ 1 Answers ]

Can I take apart and rebuild a moen shower mixing valve without replumbing

Shower mixing valve leak [ 2 Answers ]

I am buying a home and during the inspection of the bathroom we noticed that water pours out of the mixing valve for the shower. I was wondering if this requires replacement of the mixing valve or can be repaired in some other way? Can this be done by a do it yourselfer with no plumbing...

Shower mixing valve [ 4 Answers ]

I have two bthrooms back to back, and all fixtures have ample hot water except one shower mixing valve. It is a temptrol valve. I have replaced the stem twice, replace the seats, cut the water lines in the basement to see if there was a blockage in the piping but cannot seem to find the problem....

View more questions Search