Ask Experts Questions for FREE Help !
Ask
    wiegs's Avatar
    wiegs Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 27, 2007, 02:56 PM
    Securing SER cable at outdoor service switch
    What options for securing 4/0 SER at the outdoor service entrance breaker box - Frame house, service switch located on exterior on siding - thanks
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Mar 27, 2007, 06:25 PM
    Other that the SER straps shown here:

    Briscon Products - STRAPS

    Or

    Briscon - PRODUCT LIST

    PVC conduit two hole straps work very well, I believe either 1" or 1-1/4" straps will fit #4/0 SER cable. They are already gray to match the cable, and plastic that will not corrode.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Service entrance cable [ 23 Answers ]

I am re-wiring an old house. It is a small 2 bedroom, 1 bath house. We put in a 200 amp service and need to run a service entrance cable about 20 -25 ft to the inside breaker panel. My question is how big of a gauge wire should we run for the service entance cable. #? 3 conductor with ground in...

Service entrance cable [ 2 Answers ]

Having new 100amp meter installed professionally,but I am burying wire to the building which is 125' from where meter is mounted. Will I have to upsize the size of wire because of the distance? I also intend to enclose in conduit, so I'm not worried about using "U" coded wire

Lug tpye for 4/0 service cable [ 1 Answers ]

Does it matter what type lug I use or how its crimped if using a crimp type lug?. or is a allen head type lug OK? With or with out the ridgies that hold the wire tighter that some type have.. thank you... aluminum... 4/O

SER Cable [ 1 Answers ]

Is SER cable (0,0,0,2) direct bury, or must it be in conduit?

200 amp service cable [ 1 Answers ]

Good moring everyone! Quick question, I'm still in the process of upgrading to 200 amp service. I've purchaced a panel box and the guy I bought it off said he'll give me the service cable with it. The question I'm trying to find out is, the size wire he is giving me going to work 2/0, 4/0, 6/0...

View more questions Search