Ask Experts Questions for FREE Help !
Ask
    Jhskjohn's Avatar
    Jhskjohn Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 26, 2013, 02:19 PM
    What size I beam do I need to span 24 feet
    I am building a garage with storage trusses. The garage is 24' x24' I was wondering what size center support beam I need to use?
    dannac's Avatar
    dannac Posts: 267, Reputation: 9
    Full Member
     
    #2

    Mar 27, 2013, 02:54 AM
    First off... check with your local builders.

    In my area (south louisiana) a 3 x 15 or 5 x 15 Glu-Lam beam could be used.

    Not sure what you mean by "storage truss".

    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
     
    #3

    Mar 27, 2013, 07:43 AM
    A manufactured truss is self supporting and does not need a beam.

    What are storage truss?

    Chuck

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What size beam do I need to clear span 30 ft and support a live load floor? [ 7 Answers ]

I am putting a storage loft in a shop/garage 30 wide by 36 feet long. The loft will be 12 feet by 30 feet across one end of the shop. I want work space under this loft so I am looking for a clear span, wall to wall of 30 feet. This beam will have to support a live load floor above it. Should the...

What size laminated beam do I need to span 20' for my basement beam? [ 8 Answers ]

I have a one story ranch and want to eliminate the columns in a section of my basement. The beam will need to support the 2x8 floor joists which are 12' 6" from column to wall. What size beam will I need?

4X12 beam, is OK to span 21 feet? [ 1 Answers ]

SINGLE FAMILY One story building in City of LA 's Building code, is it OK to span 4 X 12 Beam to have a span of 21 Feet.

I beam size to carry a 250 ton load. Its 5 feet long and the load is in the middle [ 3 Answers ]

The 250 ton load is being applied to the center of a 2" thick plate 60" long and 48" wide by a hydraulic cylinder. The 2" plate has a 12" hole in the middle. I want to weld two I beams lengthwise along the 2" plate (one on each side) with bracing going across between the two I beams. The cylinder...

What size lam beam header is needed to clear span a 30 feet? [ 2 Answers ]

The beam is needed in a 30x40 garage. We are using trusses that are speced to clear span 40 feet but want the extra support in the center.


View more questions Search