[Snowslutz37]

I don't have water pressure to my toilet but I have pressure everywhere else what would be the cause of that?

[Milo Dolezal]

Check the following for obstruction in lines:

1. Fill valve
2. Water supply line
3. Angle stop

It is most likely Fill Valve. Close water supply, remove fill valve, disassemble it ( or buy new one ) and reinstall. See if that helped

Back to you / Milo

.

[Snowslutz37]

Check the following for obstruction in lines:

1. Fill valve
2. Water supply line
3. Angle stop

It is most likely Fill Valve. Close water supply, remove fill valve, disassemble it ( or buy new one ) and reinstall. See if that helped

Back to you / Milo

.

Ok so I have plastic lines from my hot water heater and I redid the line to the toilet and still no water but again water pressure everywhere else and I even put all new parts in the toilet it just won't fill back up like the other toilet

[Milo Dolezal]

Ok, close angle stop under the toilet. Unscrew toilet supply line from under the tank thread. Leave the other end attached to the angle stop. Take a bucket, put it next to the toilet, point the toilet supply line into the bucket - and turn angle stop ON. Now, tell me if you have water coming out of the supply line.

Back to you / Milo