Ask Experts Questions for FREE Help !
Ask
    Plumbittxny's Avatar
    Plumbittxny Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 25, 2013, 06:03 PM
    State select 40 gallon power vent water heater
    When heater try's to ignite the selenoid keeps clicking in and out quickly not keeping gas valve not to remain open,does this indicate faulty gas valve?
    scott53715's Avatar
    scott53715 Posts: 165, Reputation: 10
    Junior Member
    		  
    #2

    Mar 25, 2013, 07:26 PM
    Statewaterheaters.com is a very handy web site where you can look up your instruction manual and find trouble shooting tips. Not sure what model you have, but a dirty or bad flame sensor causes the symptom you describe. A gentle cleaning with some steel wool could do the trick. But get ahold of the manual. It's a big help.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

State Select Power Vent Water Heater [ 0 Answers ]

The vent motor on my State Select water heater will not shut off when the water has reached the desired temperature. The process of the flame heating up the water and then going off seems to be working fine. Worry about burning out the vent motor. Any ideas? Thanks

State select water heater power vent constantly running? [ 0 Answers ]

I have a State Select Model # PR675NRVTZ 75 gallon gas waterheater with a power vent that is constantly running? I have tried tapping the relay, manually turning the unit on and off with no luck. A few months ago I had it stick but after manually turning the fan on and off it started working...

View more questions Search