Ask Experts Questions for FREE Help !
Ask
    hondafit trini's Avatar
    hondafit trini Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 24, 2013, 03:53 AM
    Honda fit error code p1792
    What does error code p1792 and p1793 for a honda fit 2004 mean? What problem does this point to and possible solution?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Mar 24, 2013, 10:15 AM
    Automatic transmission problem. P1792 indicates transmission's lock-up clutch is not engaging. The problem may be related to the Engine Coolant Temperaure (ECT) Sensor circuit. An electrical fault (open circuit) has been detected in the ECT circuit. Fault could be damaged wiring, disconnected connector, damaged connector, or faulty ECT Sensor.

    Remember to change the fluid every 30,000 miles.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honda fit code EPS & after changing the plug engine not start how to fix [ 0 Answers ]

Today morning after we change the engine plug car is not starting showing that EPS on deash bord how we can fix it please suggest honda Fit 8 cylinder engine

2008 honda fit error code [ 1 Answers ]

My 2008 Honda Fit started after great difficulty tonight. When it finally did start, I pushed the radio to "on" and the display said "Enter code". I have no idea what the code is or where to find it - no mention of "code" or "error" in the manual. Also, in addition to the prompt for a code,...

Honda Fit Radio code error [ 1 Answers ]

My radio is locked up and reads "error code e". I have my radio code but can't enter it because of the error code. How do I erase the error code and enter my radio code to unlock?

91 honda accord error code 9 [ 9 Answers ]

I bought a 91 honda accord its giving a aerror code 9 and seems to shift a little out of time. Are these related to the error code or should I look at the tcu for repair. Anyway help I just want to et rid of my error code:eek: :cool:

View more questions Search