Ask Experts Questions for FREE Help !
Ask
    Di Hynes's Avatar
    Di Hynes Posts: 3, Reputation: 1
    New Member
     
    #1

    Mar 21, 2013, 01:31 PM
    Still having problems getting a bottom line.
    I need the beginning number that I know is in the $40,000.00 area minus 40% and the ending number has to be $25,190.00. I am always $1007.60 off. Someone please help!
    teacherjenn4's Avatar
    teacherjenn4 Posts: 4,005, Reputation: 468
    Education Expert
     
    #2

    Mar 21, 2013, 01:45 PM
    The number is almost 42,000. You were estimating too low. Keep trying!
    smearcase's Avatar
    smearcase Posts: 2,392, Reputation: 316
    Ultra Member
     
    #3

    Mar 21, 2013, 02:24 PM
    You are multiplying .04 times 25,190, or essentially taking 4% of 25,190, if you are getting 1,007.60. So it seems that first you don't know how to convert percentage (%) to a decimal number.
    Study up on how to do that first. But multiplying is your next mistake.
    ebaines's Avatar
    ebaines Posts: 12,131, Reputation: 1307
    Expert
     
    #4

    Mar 22, 2013, 06:13 AM
    If X% of Y = Z, then first convert X% to decimal form, and xY=Z.. The phrase "reduced by 40%" means that x = 1-0.4 = 0.6. Now solve for Y.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I repair the bottom of sliding closet door? Bottom attachment caved in. [ 1 Answers ]

Our sliding closet door is hollow inside. One of the bottom pegs caved in. The door does not stay on track. What is best way to fix it? Thanks

16.5 ic ovh carb keeps leaking out of the bottom little motor on the bottom I think c [ 1 Answers ]

16.5 ic ohv briggs and stration engine ,when I shut it off all the fuel leaks out of the bottom of the carb on the bottom of the carb is a little motor that I think controls the needle valve.Any ideas?Thanks Don

Denture Problems (Bottom Plate)... [ 3 Answers ]

I have not been able to wear my bottom plate since I came home from the dentist 5 years ago. I have no problems with my top plate except for the fact that I have to use an adhesive every morning. I have tried using it with the bottom plate also but nothing works, I just can not get it to stay put!!...

A/C leaking and Frost at Line's Top and Bottom [ 5 Answers ]

Noticed last night that hardly any air is coming out of vents, so when I checked unit, I noticed water on the floor. Felt the line and had Frost at top and bottom. Then took out air filter and stuck hand inside and felt a drip. Any suggestions on where to start?


View more questions Search