Ask Experts Questions for FREE Help !
Ask
    ramstb's Avatar
    ramstb Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 18, 2013, 08:16 PM
    Deere JX75 blade issues
    My 04 JX75 will start just fine, however just recently when I try to engage the blade 2 things occur.

    1) it takes around 10-15 seconds for the blade to reach full speed, and
    2) once I start trying to cut my grass the blade slows to a stop

    The blade lever never disengages and the motor never dies or slows. New plugs, gas, and oil. Any ideas of what could be wrong?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Mar 20, 2013, 07:53 PM
    Hi,
    Does it make a scuffing sound? Kind of bet it does. The friction disc has fractured and probably been "spit" out. Inspection will tell you whether you can replace the lower half or the whole unit must be replaced. If caught early, the latter will work.
    The part numbers are:
    GY20711 Lower half
    GY90029 Clutch
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

John Deere JX75 drive mechanism [ 1 Answers ]

My neighbor has a JX75 that is on it's last legs. One of the rear wheels doesn't drive, but the other still does. What is the likely cause? Is it adjustable? Will this require a whole new transmission?

Starting a John Deere JX75 [ 1 Answers ]

I had to borrow a John Deere JX75 to mow our lawn. I can't figure out how to start it. Help

Repairing a John Deere JX75 mower [ 7 Answers ]

My mower has not been run for a while. When I start it and take off the choke and put it at high speed, the engine revs up and down. There appears to be a throttle linkage of some sort that is moving back and forth by itself causing the up and down reving action. Can somebody advise me on repair?...

John Deere JX75 walk behind mower [ 1 Answers ]

What are the normal fuel screw jet settings (2)on a John Deere JX75 mower carb?

John Deere JX75 [ 2 Answers ]

I hit a rock with my mower ,now the blade won't engage.The blade and motor move freely and the belt is tight,but the clutch doesn't seem like it's engaging.I took the blade off ,but can't figyre out how to get the clutch assembly apart.Thie is a 3 year old John Deere JX75 HELP THANKS

View more questions Search