Ask Experts Questions for FREE Help !
Ask
    jazzysalt's Avatar
    jazzysalt Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 18, 2013, 03:05 PM
    Miller Furnace Out Of Fuel Bled Lines HELP
    Have old miller furnace, ran out of fuel, got fuel and bled lines 3 times, now unit won't reset. Is there a timing lockout
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Mar 18, 2013, 07:59 PM
    If you have reset it several times in a short period. The control probably just needs to cool off. If after 5 minutes of cool off, it still won't reset, the control is probably shot. This presumes you still have power to it & the thermostat is still calling for heat.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do the fuel lines hook up to the fuel pump on a Craftsman DYT 4000 lawn mower? [ 1 Answers ]

The fuel pump has three ports. Two of them next to each other and I need to know which line goes where.

Where do the fuel lines go [ 1 Answers ]

Fuel lines from gas tank to carb

Furnace stops working and needs to be bled [ 1 Answers ]

Hello, I have a modular home with a Miller furnace, Becket motor, up until 2 days ago I have not had any problems with it. Then I woke up cold. The light on the module was flashing, I pressed reset and nothing, I bled the line (took about 2-3 seconds) Kero started flowing so I closed it and...

No fuel Miller Cmf PO 80 [ 6 Answers ]

Hello. I just don't know what the problem is now. This is a brand new furnace. About a month. Burner was running fine, no weird noises. Than, nothing. Pump started up, but I did not hear it fire. I found it had no fuel. I tried bleeding the pump. Nothing. I had the pump bleeding,...

View more questions Search