Ask Experts Questions for FREE Help !
Ask
    jtlizard's Avatar
    jtlizard Posts: 2, Reputation: 1
    New Member
     
    #1

    Mar 18, 2013, 11:14 AM
    LG picture out
    "i have a 50 inch lg model 50pc3d-ue it started flickering a little then the picture would come back on. Now the tv only flickers and sometime you can see the outline of the picture, it is mainly dark"
    Curlyben's Avatar
    Curlyben Posts: 18,514, Reputation: 1860
    BossMan
     
    #2

    Mar 18, 2013, 11:21 AM
    Sounds like the backlight has failed.
    jtlizard's Avatar
    jtlizard Posts: 2, Reputation: 1
    New Member
     
    #3

    Mar 19, 2013, 09:26 AM
    How easy is that to fix?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #4

    Mar 19, 2013, 04:59 PM
    Due to the high number of Flatscreen problem related to Bad caps, usually bulging in Power supplies, I would say to try first, It is Quick, Free(if mechanically/electrically inclined), Search on Youtube type sites and search Flat screen cap replacement, may even have your model, Radio Shack Makes a Desoldering Iron with the Vacuum Bulb, Personally, this type works better than solderwick or soldepult types, they all work, you don't want to damage a circuit trace/board. Practice on any old circuit board and remove and resolder a capacitor sucessufully, then do it to your Tv, don't add problems. Good Luck.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

HELP - placing picture on top of another picture in Java - JLayerPane [ 0 Answers ]

Hi.. I am trying to place a picture on top of another one in java.. I have a Tshirt picture which I am going to place it in the center of my GUI Also I have a logo I want to put it on top of that picture I used JLayerPane but I guess I made mistake which I couldn't notes and solve. ...

My picture from my camera has lines through it and a red or pink tint to the picture [ 1 Answers ]

When I take a picture from my camera it shows up with lines through it and blurry and it has a red or pink tint to the picture. But when I focus on what I want to take the picture of it looks fine until I go back to look at the picture.


View more questions Search