Ask Experts Questions for FREE Help !
Ask
    kelleyshill's Avatar
    kelleyshill Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 26, 2007, 03:26 PM
    Solenoid trouble for murray riding lawn mower
    I have a murray riding lawn mower and for some reason the solenoid keeps going bad. I maybe get one or two mowing jobs done before I have to replace it. Does anyone know what could be causing this? Thanks Kim
    newaukumdon's Avatar
    newaukumdon Posts: 525, Reputation: 44
    Senior Member
    		  
    #2

    Mar 27, 2007, 08:10 PM
    Probably not going bad. The switch is an electromagnetic coil. What that means is when 12-V DC is applied to the right spot or terminal it energizes a coil and makes a strong magnetic pull. This brings to possts together and engages the starter. The reason for using this is the amperage required for a starter would burn almost all switches.

    When a solenoid fails it is almost allways corrosion on the large posts, you will hear the "clicking" as the posts come together but the corrosion won't allow contact. So as you can see unlikley you have switches corroding imediatley, You may however have low voltage. This will cause the same symptoms and over time burn a solenoid.

    Don
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My murray 11hp riding lawn mower will not start. [ 1 Answers ]

I have tried all I know to try and still my murray 11hp mower won't run. I need to know if there are any more fuses besides the one by the celenoid. I replaced the battery, starter switch, celanoid, sparkplug, and 15amp fuse by the celenoid. Are there any more fuses that I should look for? ...

Murray riding lawn mower electrical problem [ 7 Answers ]

My mower runs but only as long as the battery has a charge. And then it dies, so what could be the problem? Please help I have a huge lawn and a push mower just doesn't get it!!

Old Murray riding mower [ 8 Answers ]

I bought an old Murray riding mower last year. I'm not sure what year it is, but here is my problem: One of the rear tires has a flat, instead of loading up the whole mower in the back of the truck, I wouldm like to remove the wheel. I removed the holding pin and the washer from the outside of the...

Wires on murray riding lawn mower. [ 3 Answers ]

My dog pulled wires loose on our mower. I don't have the instruction booklet to put them back correctly. Please help!

View more questions Search