Ask Experts Questions for FREE Help !
Ask
    jameslamantia's Avatar
    jameslamantia Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 2, 2013, 10:59 AM
    Toilet bowl injector
    I digging a hole for a bathroom in basement how deep should the hole specs be for a in floor injector
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Mar 2, 2013, 01:03 PM
    I would suggest getting the sewer ejector pit and dig accordingly. If you don't have the pit but want to dig the hole now, I would suggest 30" wide by 36" deep. This should be big enough to fit any residential pit.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Mar 2, 2013, 02:53 PM
    You say "injector" are you talking about an "ejector" pit or a pump up toilet. That sits on an elevated base or over a small pit.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Toilet bowl problems - tank water is fine; bowl water is not [ 3 Answers ]

Ok - so many posts here, it's mind blowing. Here's exactly what's happening - tank is filling up just fine... water stopping exactly 1/2" under overflow tube. Flapper is shutting perfectly - no water leaking. It's the bowl water that's messed up. Toilet has been working perfectly for 12 years. ...

Toilet bowl that won't hold water, started with slow toilet, now non flushing [ 1 Answers ]

What started as a slow toilet, now non flushing except 1-2 times in morning, has turned into a toilet bowl that won't hold water but the tank still does. The tub is first on the line, then the toilet, then 30' to septic tank. Snaked through the vent, got a lot of greasy goo, but still toilet...

Cracked toilet bowl & low water level in toilet [ 2 Answers ]

Hi Everyone, So I've got two questions regarding two toilets and would appreciate any and all help as I can't afford someone to come in at this point to fix it for me. 1. I managed to drop a crystal (decoration) ball into the toilet which cracked the bowl so a chunk of the porcelain just fell...

Why is refill into toilet bowl from bowl rim holes so sloppy? [ 12 Answers ]

Help! I have removed the old ball float from my toilet system and installed a fluidmaster and since I've done that the water coming out of the holes underneath the rim of the bowl literally plopps out of the holes in a straight line and splashes up on the toilet seat and... well if your sitting...

Toilet w Injector pump ? [ 1 Answers ]

Hi-I had a powder room installed in an addition w a toilet w an injector pump. Initially it caused backflow into basement sink. A plumber added a check valve under bsmt sink and corrected this problem. But secondary issue is that when flushed a few times the Kitchen sink-located on main floor as is...

View more questions Search