Ask Experts Questions for FREE Help !
Ask
    B Patel's Avatar
    B Patel Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 2, 2013, 07:55 AM
    Maytag Washer Tl
    My washer stop after Wash cycle, does not go to Rinse & Spin Cycle,
    Any solution
    scott53715's Avatar
    scott53715 Posts: 165, Reputation: 10
    Junior Member
    		  
    #2

    Mar 2, 2013, 07:04 PM
    Without knowing more about your machine its hard to give a definite answer. It does, however, sound like your timer has gone bad (a common problem). On older machines it makes a ticking sound. At the end of your wash cycle you should be able to hear it tick. It drives the control with all of its switches through your laundry cycle. It is attached to your main control and may or may not be able to be replaced without replacing the whole unit (large round switch with the cycles). Let us know more. Helpful?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have a maytag bravos washer. I have a problem that when my washer is in rinse mode [ 0 Answers ]

I have awasher it's a maytag bravos, it fills with water when on rinse mode but does not kick on to spin mode it shuts off with an error code that reads ol on the screen and makes me start over again.what can I do

Maytag Washer [ 1 Answers ]

I recently bought a condominium and the washer was included with the place. There is no fabric softener cap or cup and I was wondering if this model has one. It's a Maytag Model #LAT7400AAW. Thanks for anyone's help!

Maytag Washer [ 4 Answers ]

Model4512 maytag washer top load. How does the lid raise and how do you remove the agitator? Thanks

View more questions Search