 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Rheem criterion ii gas furnace troubleshooting, it runs great for about 4-6 keep
.my Rheem criterion II gas furnace runs good for 4-6 hours and holds temps per thermostat, then it won't start unless I open up front panel and flick one of two small fans. It kicks right on then and runs for another 4-6 hours. I've tried blowing these two small fans with air and also vacuuming them, this has brought mixed results, some times it runs well for a few days vs hours stopping and starting normally. Every time it stops or does not start on it's own flicking those one of those small fans it starts up just fine runs for those 4-6 hours as described earlier. Any help or diagnosis is appreciated.
|
||||
Check out some similar questions!
Have a criterion gas furnace... was working, now fan doesn't come on... even when controller is put in "fan only" mode.. ideas?
My rheem criterion furnace will not ignite. The blower stays on regardless of any changes to the thermostat and I have replaced the igniter. Any ideas?
Have a rheem criterion 2 gas furnace (1X2000), our gas was out for three days (Tucson Az ) Now it’s back on, and both furnaces start and stop about ever 4 to 10 minutes
I have the Rheem Criterion II furnace. It is working OK. But the blower comes on after the desired temperature reached or it was turned off after a while.However, eventually it will turn off but blows cool air. I just don't know what to do because it blows the cool air. So I shut it down manually...
Home inspection revealed that the "housing in the furnace is cracked." We are in the process of selling our home and would really rather not pay to replace/repair the furnace. We purchased a home warranty for the new buyer and are waiting to hear back whether the warranty will cover the furnace...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
