 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Garage Heater won't light
I have a Beacon/Morris BRU75 75,000 BTU Garage Heater. My heater don't ignite all the time. When it doesn't, the light flashes 2 times. So I unplug the heater and plug it in again, sometimes it fire up and sometime it doesn't. I cleaned the spark ignitor and the flame sensor. The spark ignitor works good. I was wondering, if it could be my gas valve? How do you know if it's bad or not? I taped on the gas valve when it was trying to ignite but notthing.
|
||||
Check out some similar questions!
Heater is 30 plus years old
Heater is 30 plus years old
KENMORE HOT WATER HEATER - pilot light won't light - replace ignitor switch? How long to do myself.. and level of difficulty?
I have a 1977 Luxaire unit heater in my garage (UH100LF) that has normally worked, but this year having trouble keeping pilot light lit. It has a combination valve (off, pilot, on). You rotate knob to pilot and press down for 30 secs to light pilot. The knob needs to spring up to rotate to the on...
I have the same problem as the person who asked about getting their wall heater to light. The answer was to make sure the flame was touching the thermocouple.. . But how do you do that? I can't make the flame higher, so do I move the thermocouple lower and what does a thermocouple look like...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
