 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
We have a Carrier 58PAV and the Red LED light is on. Furnace makes a high pitch noise when starting up. We are having trouble understanding the directions provided in the manual to do the component test. Instruction manual says to "To initiate the component test sequence shut OFF the room...
Have a goodman gas furnace it cycles through once and then makes a pop sound? It then gives a blinking code of 1 blink is this the gas valve?
I have a Nordyne G5RC080C-16 gas furnace which had the blower fail. It was in A/C mode with the condenser still running but no blowerat the furnace/evap. A tech repakced the blow motor and capacitor -- still no blowe, even in direct 'fan' mode. There is a code (one flash) suggesting limit switch...
Furnace seems to run normal, but every once in a while blower motor keeps running and I have to turn off ac switch to stop. Error code in memory, 5 red flashes. Rollout switch. Furnace will now run normal for a while, slow green flashes, then slow amber flashes when furnace is operating,...
Carrier mvp 080 14 series 140 blower did not work replaced circuit board and blower module blower now works but led flashs 12 "blower calibration lockout"
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
