Ask Experts Questions for FREE Help !
Ask
    dstory's Avatar
    dstory Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 14, 2013, 08:20 PM
    Where do the 5 wires connect to on the digital thermostat
    Where do the yello,green,blue,white,and red wires connect to on the thermostat
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Feb 14, 2013, 09:15 PM
    Thermostat information should be with the thermostat. You didn't even tell us the brand.
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #3

    Feb 15, 2013, 07:41 PM
    We need to know to what terminals the wires connect on the other end.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Do I connect old, unmarked thermostat wires to new thermostat? [ 2 Answers ]

Hi folks, I have an old mercury Honeywell thermostat with two unmarked wires sticking out of the wall. They almost look like thin audio cables, with one lighter than the other. I was planning on replacing it with a new Thermostat for the forced hot air gas furnace (which is probably about 10-20...

How to connect red and white wires to a thermostat with G, why, W, RH and RC wires? [ 0 Answers ]

I'm trying to change a Honeywell RTH 6400, to a LUX TX 500

Didn't label the wires when installing a new digital thermostat [ 3 Answers ]

I removed my old round dial thermostat and did not label the wires. It's a 5 wire system. When I went to install the new Honeywell digital thermostat I realized I didn't know which wires went where. I have these color wires - Blue, Red, White, Green, Yellow. The digital thermostat has places...

Can't hookup digital thermostat. Only has 2 wires! [ 1 Answers ]

I have a gas furnace and upstairs I removed the old thermostat and it only has a yellow and green wire which the two wire digram it gives me with the digital only uses R1 and w/b . Please help I have no heat.

I think I shorted contact wires for digital thermostat while installing. [ 3 Answers ]

Actually, I know I shorted it! I was installing a ritetemp therostat. C-Blue G-Green Y-Yellow W-White R-Red It seemed pretty straight forward.

View more questions Search