Ask Experts Questions for FREE Help !
Ask
    Ljf777's Avatar
    Ljf777 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 12, 2013, 05:52 PM
    Intermatic pix 100 transformer power issues
    I have installed and Intermatic PX 100 W safety transformer
    When I Power up my voltage pen is registering power on the high-voltage side However the two black low voltage wires are showing no power according to my voltage reader. . Please help thank you
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #2

    Feb 13, 2013, 01:12 PM
    Do you have a meter to test the circuit?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Power supply issues Apple Power Mac G4 dual 1.25 MDD [ 4 Answers ]

I disconnected the power cord on a G4 MDD dual 1.25 to reset the firewire ports and now the unit will not power on. When I push the power button it flashes on for a sec and then nothing happens. I tried doing a SMU reset and a different power cord to no avail. I have had this unit for about 6-7...

How is a transformer connected to get power and then give power to the thermostat [ 2 Answers ]

This is about hvac units: how is a transformer connected to get power and then give power to the thermostat And where is the transformer excactly - lets say on a residential a/c unit with gas furnace

Thermostat power transformer [ 4 Answers ]

Can I connect a thermostate directly to a 24 volt transformer plugged into a wall outlet rather than taking the power from the furnace (LP fireplace in this case)? My existing thermostat runs on battery power alone and I do not see a transformer in the fireplace unit. WOuld be much simpler for me...

Questions on a power transformer [ 38 Answers ]

Hey Folks, I have a 36-volt Lestronic II battery charger that is not working. I do have a slight background in electronics so I've done the diagnosis which resulted in some questions. Here is the situation. When I plug it in (120 volts AC) and turn it on, the transformer draws 8.9 amps...

View more questions Search