 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Honda hs724 adjust drive clutch lever handle hold down
The Honda has the auger handle ( left) and the drive wheel handle(right). When you hold both down the auger handle(left) stays down so you can adjust the speed or the shoot. My left handle ( auger) will not stay down. Is there an adjustment so this will happen or is there a broken part ? Thanks
|
||||
|
||||
|
Hi,
Since the drive lever locks the auger handle, I would look for why this is not happening. The manual can be found at Honda(there are two based on serial number) at: Honda Power Equipment: Honda Generators, Lawn Mowers, Snowblowers, Tillers Peace, Clarke |
||||
|
||||
|
You can enter the Honda part numbers you need into the search at http://www.Partspak.com. If you don't know your part numbers, you can use their free parts diagrams at Yamaha Honda Mercury Boat Jet Ski ATV Motorcycle Repair Parts Johnson Evinrude Suzuki Kawasaki Polaris - PartsPak.com
|
||||
|
||||
|
Hi,
Another site that has OEM Honda parts but is in actuality a boat dealer is:Honda Parts Peace, Clarke |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Have a Craftsman riding mower model 917.256530. Won't start - due to following I think. Attachment clutch lever which engages and disengages blades is stuck about half way between engaged and disengaged position. I can move it up to the engaged position. I can not move it down to the disengaged...
How do I install attachment clutch lever on crafysman mower model # 917.28922
Once you engage the auger lever and drive lever, you can let go the auger lever and it will remain engaged unless you release the drive lever. That function no longer works on my blower. Any ideas what went wrong? Thanks, Bruce
My clutch lever on the left handle bar, doesn't engaged until I have it gripped all the way down to the handle bar. Now its to the point where, with it is gripped down it doesn't engage the clutch at all. How do I adjust the clutch. It is hydraulic.
I have a Honda snowblower HS724 which was only used 2 or 3 times a couple years ago. 3 months ago I started it, backed it out the shed and put it back in. Let it sit again until a week ago (and yes there was gas in it). Now it won't start. Here is what I have done per instructions from just about...
View more questions Search
|
