Ask Experts Questions for FREE Help !
Ask
    NTDIMER's Avatar
    NTDIMER Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 9, 2013, 09:02 AM
    How to clean the carb on my craftsman snowblower
    How do I clean the carburetor on my craftsman snowblower. Blower won't start.
    scott53715's Avatar
    scott53715 Posts: 165, Reputation: 10
    Junior Member
    		  
    #2

    Feb 10, 2013, 02:00 PM
    It depends on your model, but here is a useful YouTube 2 part

    www.youtube.com/watch?v=B9ko4gblA 1

    www.youtube.com/watch?v=SHVFUjbgJOA

    Also keep in mind that the simple primer bulb that you push prior to starting is notorious for not pumping air into the carb, and is really cheap and easy to replace. Many snowblowers have been thrown at the curb for want of a 3$ part. Good luck!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Small hole in snowblower carb? [ 0 Answers ]

Hi When I push on the primer bulb of my snowblower the air blows out of a tiny hole on the outside of the carb. Not even sure if this hole is supposed to be there. Help!

Snowblower backfiring from carb [ 2 Answers ]

Our snowblower is an older model Arien, I'm unaware of the motor type because it is not the original. It has to be started using a jumper cable, and looks as if it has seen better days. My dad, the owner, has been taking good care of it, and it was working fine yesterday, but today, when he tried...

Snowblower carb [ 2 Answers ]

I have a toro snowblower I don't know what year it is sometime in the 90s and it won't start due to gummy gas so I need to take the carb off and clean it I never done this before and I was wondering how to take it off and where its located I appreciate it ? ...

Snowblower Carb Problem? [ 4 Answers ]

Hi. I have a small Murray Ultra 5 HP, 22" snowblower. I have been a bad boy and have not taken care of it very well, no fuel stabilizer over summer, etc. The problem now, after about 3 years, is that when start, engine does not run smoothly, and will die under load. Also, looks like is firing at...

View more questions Search