Ask Experts Questions for FREE Help !
Ask
    wcpguy's Avatar
    wcpguy Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 25, 2007, 08:17 AM
    Push lawnmower will start, but immediately dies
    The push mower is a 4.5 HP. It was bought last year. After pushing the primer 2-3 times I can get it to start, but it will immediatiely die. I can keep it running by pushing the primer. I've replaced the spark plug, cleaned the air filter and replaced the gas. Any ideas are appreciated.
    newaukumdon's Avatar
    newaukumdon Posts: 525, Reputation: 44
    Senior Member
    		  
    #2

    Mar 25, 2007, 08:41 AM
    Fuel starve, the carb needs to be cleaned well and a new kit installed.

    Don
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Murray push lawnmower [ 1 Answers ]

I have a Murray push lawnmower that I want to know the year of manufacture. Model 21673X92A Date Mfg 1283 It has a Tecumseh engine TVXL115 56025A Many thanks.

Kenmore Elite dryer - Push to start, stops when button released [ 2 Answers ]

Hi, I am having the same problem many of you out there have experienced. I purchased a new Kenmore Elite Electric Dryer 2 years ago. I have read all the responses posted here. I have taken the lower front panel off, totally cleaned the insides, and tested the contacts for continuity that were in...

Toro push lawn mower will not start [ 3 Answers ]

My Toro Lawn mower will not start. The starter cord will not pull. Please help! :mad:

Lawnmower won't start [ 2 Answers ]

I have tried for two weekends to get my Toro Lawnmower (3 yrs. Old) to start with no luck. Last week, the pull string broke and I have replaced that as well as the spark plug. Anything else?

Lawnmower won't start [ 3 Answers ]

I have a murray 12.5 that I just bought from someone , used it for the last couple of months and now it won't start , it sounds like it's dragging I have changed the oil and the gas when I got it but this is the first it's done this. The flywheel does move and it does have oil so it's not locked...

View more questions Search