Ask Experts Questions for FREE Help !
Ask
    martinjd's Avatar
    martinjd Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 9, 2013, 05:07 AM
    Villager stalls
    My mercury village van will stop running after it heats up. It will start bucking and jerking after I start it up againand put it in gear
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Feb 9, 2013, 05:59 AM
    Check for codes and pending codes, using an advanced scan tool. It may be a bad MAF Sensor. Have you changed the fuel filter in the last 30,000 miles?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

97 mercury villager car alarm [ 2 Answers ]

Hello: I'm trying to disable the car alarm for a 97 mercury villager. I can not lock the door, because when I try to unlock it with the key the alarm always goes off. The only way I can silence the alarm is to unhook the battery. This resets the radio and everything else and is annoying. So I'm...

98 mercury villager fuel pump noise [ 0 Answers ]

I do have this funy noise on the driver side by the fuel tank, every time i start the engine and last for cuple minutes after , sounds lake wipers sistem wen is working. The car is running fine .

1996 Mercury Villager Engine Knock [ 2 Answers ]

Need some advise, I have a 1996 Mercury Villager with a 3.0L engine that has 128K miles on it that has been very well maintained over the last 10 years or so that we have owned it always have the oil changed and any other repairs that were needed. Last summer we had an oil leak that we took in for...

Mercury Villager power steering [ 2 Answers ]

I've heard that Amsoil ATF can be used in a power steering system. Is there any problem with mixing the Amsoil with what's already in the system? I need to change the fluid, but don't want to do the full flush procedure. I'm considering the turkey baster way of doing it - emptying the reservoir...

Mercury Villager power window [ 3 Answers ]

I have a '94 Villager and the driver's side power window died. It seems like the switch is active - the rpm needle dips slightly when I push one of the buttons. There is absolutely no action from the motor. The passenger side window is fine as well as both of the rear 'wing' windows. Any ideas...

View more questions Search