 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Pre-testing aprilaire 700
I am trying to replace an aprilaire 760 model with the new 700. The first one I tried was a 700m but it was defective. I have since returned and had to move to the 700 with automatic humidistat (other w out of stock). Before I go through installation I want to check the operation of the unit. Can I expect that the fan will operate by just plugging in the unit and touching the two brown wires coming from the unit together or does the unit need to be fully installed? This used to work with the 760 models. I do not want to cause issues with the new unit if this is not possible. Thanks.
|
||||
Check out some similar questions!
2005 Aprilaire 700 humidifier. Replaced a non-working circuit board. Now, the humidifier works fine when the furnace is running. It starts and stops as it should based on humidistat setting. Problem: If the humidifier is running and the furnace shuts off, the humidifer fan stops, but the...
My aprilaire 700 call dealer is flashing and the display is saying E 3. What do I need to do to fix it.
I am installing a Aprilaire 700 Humidifier on a Goodman GMNT gas furnace the Furnace control board is a white rogers 50T 35-730 it has separate hum 24v Terminal and hum 120v terminal the Aprilaire 700 Humidifier includes a built in 110v to 24v transformer which one should I connect it to and also...
I installed Aprilaire 700 humidifier on my furnace - American Standard Freedom 90 Single Stage but I don't know where I can connect 24V from humidifier control panel in furnace. I'll appreciate your help. YP
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
