Not your question?
Ask your question
View similar questions
Check out some similar questions!
Oil leak between rear engine and transmission
[ 3 Answers ]
2 months ago I went to the ford dealer to flush my transmission with amsoil synthetic on my 05 3/4 f250. Last week I noticed a oil leak between the rear engine and transmission. Anyone had similar problems?
Oil leak comes from between engine and transmission
[ 1 Answers ]
I bought a used Isuzu Crosswind car with 4JA1 engine 3 weeks ago. I noticed an oil leak between engine and transmission. First mechanic changed the oil seal, but leak still exist. I transferred to other mechanic, the same we changed the oil seal, but the oil leaking became serious. The later...
2006 briggs & stratton 18.5 engine can only move engine 1/4 turn & it stops
[ 4 Answers ]
2006 craftsman briggs & stratton 18.5 engine ran fine , I shut off for 10 min coould not get it started again. Starter is good, oil level is good. Took cover off top of engine can only move engine 1/4 turn & it stops like it is jamed on something. The machine has very few hours of use & was always...
This has to do with a Rebuilt Engine and a Transmission
[ 1 Answers ]
I have recently installed a rebuilt engine and transmission, the engine is a 5.0L V8 (302), the transmission is an AOD (automatic overdrive). They came out of a 1979 ford thunderbird. The engine and transmission both operate at peak performance. But I am having a problem and I'm somewhat confused...
Transmission Flushing vs Changing
[ 1 Answers ]
Once and for all I'd like to know if it's generally better (factory recommended?) to change automatic transmission fluid the traditional way or have it flushed? View more questions Search
|