 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
If there is nothing obvious, like a screw or hole in the side of the handle then assuming you have a dome shape at the bottom of the handles, spin the dome shaped part of the handle off counterclockwise... ;)
If you can't quite grasp it tightly enough, wrap some duct tape around the base and try again. See if that works... Mark |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a Peerless bathroom faucet=2handle. I have it apart but I am not sure if the rubber gasket goes with the tiny hole at the top of the bottom when you insert it above the spring.
I have a peerless two handle, high arch swivel spout, 2 hole, 8" wide kitchen faucet that has no model number where Peerless says it should be on backside of faucet base. Also the white cross handles have NO buttons on top where screw should be to hold handle on. Checking the Peerless site, all...
How do I fix a dripping Peeless bathroom faucet?
I have a Peerless bathroom sink faucet. It is a two-handled faucet. The faucet is leaking, and the water feels cold, so I'm getting it relates to the cold water faucet. I removed the handle and pulled out the cartridge, but the bottom of the cartridge is flat. There is a rubber washer embedded in...
I have a Peerless bathroom sink faucet. The faucet is leaking, and the water feels cold, so I'm getting it relates to the cold water faucet. I removed the handle and pulled out the cartridge, but the bottom of the cartridge is flat. There is a rubber washer embedded in the base of the cold water...
View more questions Search
|
