Ask Experts Questions for FREE Help !
Ask
    JoeJ's Avatar
    JoeJ Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Jan 28, 2013, 01:03 PM
    Electric wall heater with fan
    Hi,

    I am trying to find out the rating parameters of a part called a thermal cutout switch, AKA a limit switch used in an electric wall heater with a fan.

    It is an older nutone 1250 Watt wall heater with a fan and built in thermostat

    I removed the old thermal switch but the writing on it is not readable and the manufacturers have not been any help.

    Any suggestions,

Check out some similar questions!

Can an electric wall heater 220 v. Be rewired to 110? [ 3 Answers ]

We purchased a wall heater thinking the directions said it could be wired either 220 or 110 but when my husband started to install it he found that was not the case. It was special ordered from one of the big box stores and they won't allow a return. Any help?

Dimplex Baseboard Electric Heater Wall Thermostat. [ 2 Answers ]

Thermostat does not shut off heat when set at 0c

Electric wall heater wiring at 208v [ 1 Answers ]

My wall mounted electric heater is rated at 208/240V, single phase. There are two wires provided for connection to the power source, red and black. I know I must use #12 wiring and a 20A circuit breaker. How do I wire the heater to the panel and how many wires do I extend to the panel. Does red go...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.