Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to embed metal letters in concrete
[ 6 Answers ]
We want to embed 10" high x 1.5" deep metal letters into a concrete band. The letters come with 3" threaded studs. The concrete band will be 8" deep by 2' wide, with rebar. The letters will be flush with the finish surface of the concrete. It's a bike trail, so we want to be sure that the...
Attaching stucco lath to walls
[ 6 Answers ]
Hi, I am going to stucco the exterior walls and had a question. Does anyone recommend using screws rather than nails to attach the lath to the sheathing? It is 5/8 plywood sheathing. Also, since I am doing this myself I most likely will not be able to apply the coat to the entire house before...
Difference between concrete block and cinder block
[ 1 Answers ]
What is the difference between concrete block and cinder block when used in a home's foundation? What makes cinder block less desirable?
Erecting a metal pole fence in concrete
[ 2 Answers ]
I have a swimming pool in my backyard and my nephews are in town and staying by me. I live in Florida and would like to erect a fence around it. I have got a quote that was $1000. I am very handy and need some tips on how to place metal poles sticking above ground about 5 feet. Connected to the...
Attaching A Closet Flange to Concrete?
[ 9 Answers ]
What I have is a bathroom I'm trying to remodel, I have removed the toilet in my 1976 home and found that I have a Cast iron 4" pipe and a cast iron Closet flange thats Shot, and I might add is not attached to anything at all. Also found that the original toilet had a piece of 1/2" treated Plywood... View more questions Search
|