Ask Experts Questions for FREE Help !
Ask
    sgvaughan's Avatar
    sgvaughan Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 26, 2013, 12:43 PM
    Trane model ysc090a3eha170 need 24 volt hookup
    I am wiring a new thermostat that takes a 24volt hookup. There is not a c terminal on the board for this hookup.
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Jan 26, 2013, 12:53 PM
    You can tie into the common on secondary side (low voltage side) of the transformer. C stands for common, so the common of the 24v side will work the same as a C terminal.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Model # RTH2310B 5-2 style two wire hookup 24v [ 0 Answers ]

Honeywell Thermostat Model RTHL2300B1012 I have Taco Zone valves. The two wires are a sw close heat on open off. What two connectors do I use on the stat. I omed out two connectors that switched on and of moving temp control up and down hooked up the two wires for this zone and it works so far....

My Trane XE80 UNIT is burning out my 24 volt Transformer. [ 1 Answers ]

Is my contacts bad on my condensing unit?

480 volt transformer step down to 120 volt or 230 volt [ 1 Answers ]

AC Axial Fan: run on 120 or 230 input volts / Rated Currect .061 or .053 / Input Power 7 or 6 watts. Supply voltae 480. Need a step down transformer / 480 to 120 or 230 volts.

Janitoral model cpke30-1b does not have 24 volt power [ 1 Answers ]

There is no 24 volt power from the compressor back to sequencers. What may cause this?

View more questions Search