Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Heating problem
[ 2 Answers ]
I have a York dual system model # P2MPD20M09601A, with digital thermostat. My setting is 72 degrees with automatic setting. The problem that I am experiencing is that the unit ignites for heat, and shortly after ( less than a minute ) shuts off. Please advise.
Central heating problem or water meter problem?
[ 3 Answers ]
We live in an apartment building and the individual water usage is measured by private water meters (mechanical). When the apartment was built, 2 years ago, some of the meters had been fitted the wrong way (in reverse). Yesterday a plumber attended to rectify 3 meters. My 2 neighbours meters were...
Heating Problem
[ 0 Answers ]
My heating unit comes on but will not stay on past 70 degrees and don't blow as hot as it usually do. Also if I set it to 80 degrees it still cuts off at 70 degrees. No matter what I set the thermostat at, 70 degrees is max.. At that point the unit shuts off. Once the house gets cool I have to cut...
Heating problem
[ 2 Answers ]
The problem I have is that my radiators would not get hot when turned thermostat up .but thermostat clicked when turned up,I have a 3 port control valve so I turned it from auto to manual then I got rads hot when I moved lever back to auto rads would not cool down so I had to switch off at control...
Heating problem!
[ 6 Answers ]
As I was watchingTV this morning I noticed that it was getting hotter and hotter in the house. I looked at the thermostat and it was not calling for heat, but it was still blowing very hot air. I turned the thermostat to the off position and it would not turn off. I tried cycling it through the... View more questions Search
|