Ask Experts Questions for FREE Help !
Ask
    noble344769's Avatar
    noble344769 Posts: 3, Reputation: 1
    New Member
     
    #1

    Jan 25, 2013, 08:45 PM
    Will a relay keep my transformer from reading 24 volts?
    I am working on a electric furnace and I thought since the transformer was only putting out 2.8Volts that it must be bad. I went and got another one and wired it in and it reads the same. Nothing seems to be open in the system and I can't power up the thermostat to kick on the furnace. Could the relay be bad?
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Jan 25, 2013, 09:28 PM
    What is the input voltage to the transformer?
    noble344769's Avatar
    noble344769 Posts: 3, Reputation: 1
    New Member
     
    #3

    Jan 25, 2013, 11:29 PM
    I got two legs of 120 volts but only 2.8 is coming out of the transformer
    noble344769's Avatar
    noble344769 Posts: 3, Reputation: 1
    New Member
     
    #4

    Jan 25, 2013, 11:30 PM
    Quote Originally Posted by hkstroud View Post
    What is the input voltage to the transformer?
    I got 240 into the transformer and only 2.8v coming out
    Handyman2007's Avatar
    Handyman2007 Posts: 988, Reputation: 73
    Senior Member
     
    #5

    Jan 26, 2013, 03:32 PM
    Is the 2.8v with the transformer connected to the relay? If so disconnect the relay or whatever is connect to the 24v side of the transformer and check the voltage. If 24v is present, the problem is AFTER the transformer.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have no 24 volts on my ac unit even with a new transformer [ 6 Answers ]

My ac unit went out last week. I got the meter out and found that there was no 24v coming out of the transformer. I checked to make sure there was voltage coming in, and there is. I replaced the transformer with a new one, made sure it was hooked up properly, and still no 24v. Also... where the...

Mother board on the outside unit has only 12 volts reading [ 2 Answers ]

The inside heat white wire does not have any power coming from it.

Outlet controlled by light switch is reading 79 volts why [ 7 Answers ]

I have a set of outlets that the top outlet is controlled by a light switch. They do not work. I get a reading of 79v at all the outlets and at the switch. The bottom outlets all work and read 120v. The breaker controls all of them. Any suggestions

Alternator Reading Zero Volts at Battery [ 1 Answers ]

I have a 2002 Civic EX and the charging system light came on. I dropped in a new battery as the original was getting tired anyway. The car started but charging system light was still lit. I had the alternator tested and it is showing zero volts. I have seen alternators show low voltage, but...


View more questions Search