Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
No fuel getting to plugs
[ 1 Answers ]
Have a 26 hp briggs, we had to replace a crank case gasket, when we put it back together we are no longer getting fuel, we replaced fuel filter, cleaned carb, the fuel pump seems to be working (not sure the flow it should be putting out) any ideas?
How to start a TPI motor, new fuel pump,plugs, getting 45#'s of fuel pressure.
[ 9 Answers ]
1989 Pontiac Formula 350 that won't start. New plugs, fuel pump, ECM, injectors are good, has spark. Out of options!
98 Honda Prelude - Cranks but doesn't start, plugs fouled with gas.
[ 2 Answers ]
I have a 98 Prelude that runs strong for about 2 days and then doesn't start anymore. They plugs get fouled with gas and won't crank up. I can hear a few pistons going and then nothing at all but the starter. I have recently replaced the plugs, wires, cap and rotor as well. All the fuses seem...
Fuel solenoid on Sears carb
[ 3 Answers ]
Clarke will likely be the only responder but can anyone explain the purpose of the electric fuel solenoid on the bowl of a Sears tractor carb? Is it just to stop the flow of fuel from flooding the carb after you shut down the ignition?
No fuel in carb bowl
[ 3 Answers ]
I recently obtained a briggs and stratton 20hp riding mower that won't run. Free of course. The original owner said it quit running one day while cutting the yard. I took the carb apart and cleaned it. It was reinstalled and an attempt was made to crank it. When it did not crank, I squirted gas in... View more questions Search
|