Ask Experts Questions for FREE Help !
Ask
    sukh7854's Avatar
    sukh7854 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 21, 2013, 02:55 PM
    Remote/fan not working.
    Since I'v moved in to our house our sealing fan has never worked. Any segestions
    Kyle_in_rure's Avatar
    Kyle_in_rure Posts: 341, Reputation: 10
    Full Member
    		  
    #2

    Jan 21, 2013, 02:58 PM
    It does not work at all?
    -Is it controlled by any switches or strictly by the remote? (or do you know?)
    -Do you have any tripped breakers?
    -What is the brand of the fan? (
    sukh7854's Avatar
    sukh7854 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jan 21, 2013, 03:14 PM
    Fan/remote not working
    It has a wall switch. I'm not sure of the brand of the fan. And no breakers are tripped
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #4

    Jan 22, 2013, 08:16 AM
    Did you do the installation?

    If you have a remote, why is there a wall switch. Please try this: with the wall switch on and the fan running can you vary the speed of the fan?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hunter Fan not working - brand new fan with remote [ 9 Answers ]

We just purchased a Type 2 Highbury Hunter fan from Home Depot. It comes with a remote. We have followed all the wiring directions in the booklet, but fan does not work. Light works but not fan. Our ceiling wiring has an extra wire (red), so we hooked that up to light wires and light started...

Hunter remote controlled fan -- light is working, but fan is not; 5 years old? [ 2 Answers ]

Hunter fan w/ light & reversing switch on remote, remote not working properly [ 1 Answers ]

Hi, I have a Hunter fan with light and remote control, with reversible switch on the remote. RC was working fine until recently, and now, the fan will not turn off with it. I do not have a wall switch. The light works fine with RC, and the reversing also works, so does the fan speed. So, what...

Fan stopped working--is it remote? Or fan? [ 3 Answers ]

We had two Harbor Breeze ceiling fans installed. We used two separate remotes. After a month, suddenly one of them stopped working. We switched the batteries and it still did not work, so it is not the battery. What do we do? How do we find out if it is the remote or something inside the fan. This...

Fan light kit working but not fan - with or without remote [ 2 Answers ]

I have a Hunter Fan (I think) that stopped working (magically) but the light kit on it works. I had recently removed an identical model fan with light kit out of another room that was working fine when I replaced it with an updated fan. So I replaced that "non-working" fan with the other one -...

View more questions Search