Ask Experts Questions for FREE Help !
Ask
    jrmc1620's Avatar
    jrmc1620 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 21, 2013, 01:04 PM
    My craftsman snowblower blazes won't turn
    My craftsman snowblower blazes won't turn I replace the pins on the blazes wend I press down on the handle to start the blazes to turn the blazes won't turn and it makes a sound and turns off the motor.
    odinn7's Avatar
    odinn7 Posts: 7,691, Reputation: 1547
    Entomology Expert
    		  
    #2

    Jan 21, 2013, 01:13 PM
    Sounds like you have a rock stuck in the impeller (the part that throws the snow out of the machine) or the blades. If not, then you probably have a problem with the transmission.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman 9.5 B&S snowblower won't turn [ 6 Answers ]

I thought the pull start was frozen. Trying to pull enough cord out for it to snap back I broke it. I tried the electric starter and just got a buzz. We had a few freeze and thaw cycles with wind and rain so I figured It was frozen up as well. I moved it in doors. All warmed up same buzz from the...

Belt won't tighten on craftsman mover and blades won't engage [ 1 Answers ]

We put a new belt on deck but the belt is real loose and the blades do not engage, it's really hard to engage the blades as well . Model 28928

Craftsman snowblower [ 0 Answers ]

My craftsman snowblower is pulling the snow in but its not shooting it through the top

Craftsman snowblower augers turn slow [ 3 Answers ]

Hey guys, anybody know why the augers in my 9 horse craftsmen blower won't turn so well. It is about 8 years old (workhorse) and I have had problems shearing pins although they are currently intact. It would blow the light snow 4" in the main drive but at the end where the plow dumps, it would...

View more questions Search