Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Knob and tube ceiling fan install - no junction box!
[ 14 Answers ]
Hi, I'm trying to install a ceiling fan in our guest bedroom. 1915 house, two condo conversion. Other fan I already installed had nice modern box and romex in the ceiling. This room had no box under the light, and had many wires coming out of the ceiling : 2 pair of what I think are K&T,...
How do I install a ceiling light when the outlet box has white, black, copper and red
[ 7 Answers ]
I am trying to instal a semi-flush ceiling light and the wires that are coming out of the ceiling wiring box are black, white, copper, and a red. All instuctions say white to white, black to black and green to the copper house wire. How to I wire this ceiling light? I also have a double switch....
Can a fiber optic cable junction box be used as a pull box
[ 1 Answers ]
We have terminated a 24 fiber in a junction (30"x24"x8") and have several 1-2 fiber coming out to various points. The would like to use this box to pull additional multi-fiber through the same box. I believe this is not allowed. I need clarification.
I have a 3-wire 240 VAC power box, and would like to install a 120 VAC outlet from it
[ 4 Answers ]
Do I just take power from one leg and ground? If so, how do I ground the outlet?
Junction box under panel box?
[ 1 Answers ]
I am bringing new underground cable into an unfinished garage which is coming directly from the meterbase. The cable will come out of the ground at the garage, run up the outside of the wall for approximately 3 feet (obove the 2 high cinderblocks) and then go through the wall where it will connect... View more questions Search
|