Ask Experts Questions for FREE Help !
Ask
    Shane-Meda's Avatar
    Shane-Meda Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 21, 2013, 06:26 AM
    Air handler minimum room size
    I would like to know what is the minimum room size for an Air Handler and Electrical room together?
    Shane-Meda's Avatar
    Shane-Meda Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jan 21, 2013, 06:27 AM
    What is the minimum size for an Air Handler room for a 3000sf structrue?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #3

    Jan 21, 2013, 06:45 AM
    Moved thread from Electrical to HVAC forum.
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #4

    Jan 21, 2013, 05:42 PM
    Tk, I wish I had the power to move it back, lol.

    Shane, you are going to have to check with the local authority having jurisdiction on this one.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Air handler won't run, just an unusual hum from the air handler. [ 0 Answers ]

My sister in law tried to install a new thermostat and has somehow messed something up. I went over and her Trane air handler will not run. I found that the glass bus fuse beside the transformer was blown. I replaced the fuse and I still get nothing except the hum from the transformer. I...

How to calculate the air supply size for a room, according to duct size? [ 1 Answers ]

I have a 4 ton central heating and a/c. My bathroom was remodeled and now is 66 sf. My existing flex duct to the bath is 7" DIA. Can I use a 12x4 supply boot with a 7" duct, or do I have to change the duct size? How can I calculate the size of a supply boot according to duct size?

What size flex duct runs off a 5 ton air handler [ 5 Answers ]

Have a 5 ton air handler with a 4 ton condenser. Off my supply plenum I have 3-6", 1-9" and 1 10" flex runs I know they are too small. Will replaceing the 9 and 10" runs with 2-12" runs be enough so I don't restrick this handler

Minimum Circuit Amps for 2 ton air handler with 5kw heat strip [ 2 Answers ]

Hi all. I currently have a 30Amp breaker on 10 gauge wire for the air handler and heat strip. This was a new install and the local inspector seems to think that 30amps is not enough. I took a picture of the specs and uploaded below. What breaker/wire is needed to be in compliance? Any help is...

Air handler room size [ 3 Answers ]

What are the minimum and optimum dimensions for the closet for an air handler for a heat pump HVAC system. This is for a 2200 sq ft residence.

View more questions Search