Ask Experts Questions for FREE Help !
Ask
    Pops One's Avatar
    Pops One Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 20, 2013, 08:15 PM
    I have a 240V baseboard heater and it will not trun off if the thermostat is on.
    I have a 240V baseboard heater and it will not trun off if the thermostat is on.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Jan 20, 2013, 09:34 PM
    If the thermostat is ON, why should the heat be off? Perhaps you should rephrase the question.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Removing a 240v baseboard heater [ 2 Answers ]

Hello, I removed a baseboard heater, and now three other baseboard heaters in the house do not work. After some thought and research, I think it is possible that the heaters are wired in series, and that I removed the last one in the series, and now none of them work. What is my next step?...

What circuit breaker do I use with a 2000w 240v marley baseboard heater? [ 1 Answers ]

I was given a 10-2 wire as it is only one unit directly to the panel and a 30/30 amp breaker. However, the unit only has a black and white wire and the cooper ground. After connecting the white, the black and the ground, I still have an empty 30amp and I am wondering if they gave me the wrong...

Screwed Up 240v Wiring for a Baseboard Heater [ 3 Answers ]

I was about to replace an old single pole thermostat with a new double pole one when I discovered quite the shocker. When I took the old thermostat out of the wall, I immediately noticed there was no box. Someone had just chiseled out enough room for it in a stud! Oh yes, it gets better. The...

Dimplex 240v baseboard and thermostat wiring [ 1 Answers ]

What gauge wire is recommended for connecting a double pole thermostat to a dimplex 240volt 2500watt 102inch baseboard heater? Also is there a diagram for this connection? Thanks

View more questions Search