 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Sears 600 series flame throwing issue
Hello I am having issues with my furnace. It is a two-burner Sears 600 series system. When we turn it on, after a few minutes it kicks on and shoots out flames.
I recently lost my Father and don't know anything about these things nor do I have the money sources to have someone come look at it. |
||||
Check out some similar questions!
I purchased a property with the Sears Kenmore 600 Series Model 867.733531 wall mounted natural gas heating unit that isn't working right. The burner starts when I switch it to automatic, but the fan won't start and the heat doesn't shut off on high heat. The fan only comes on in manual mode. I...
What is the BTU output rating of the Sears wall furnace 600 series?
We have an older series600auto heating mod#86776762, problem is the heater stopped putting out warm air while the fan just stayed on, could not get it switched over to the a.c. either, just the fan. Replaced the thermostat still the same thing just the fan on, had to unplug the unit inside the...
I recently had a problem with the thermocouple not allowing the pilot to stay on. That's fixed. Now.. the furnace takes a long time to heat up... approx. 4-5 minutes before the fan will even turn on and the air blowing out doesn't feel very warm. The furnace ran for 45 minutes and did not heat...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
