 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Model # RTH2310B 5-2 style two wire hookup 24v
Honeywell Thermostat Model RTHL2300B1012 I have Taco Zone valves. The two wires are a sw close heat on open off. What two connectors do I use on the stat.
I omed out two connectors that switched on and of moving temp control up and down hooked up the two wires for this zone and it works so far. Should be less than 1 amp load 24v. I would like to know the two that should be used. |
||||
Check out some similar questions!
My old thermostat has w1 and why wire hookup so I'm trying to figure out how to connect
[ 0 Answers ]
Wiring new thermostat. I do not have 24V on Red Wire?
[ 2 Answers ]
I am trying to replace our original thermostat (2 years old) with a new one which has multiple programmed on/off times. The original wiring had the following wires : W, O, G, R, C (black), Y. The new thermostat has the following terminals: G, RC,RH,Y/O, W/B, Y1 Any suggestions on how to...
Difference between Hookup Wire and Building wire
[ 2 Answers ]
What is the difference between Hookup wire and Building wire. Are they same If so then why call hookup wire
5 Wire 24v AC/Heat System
[ 3 Answers ]
Hi, I bought a home. Had no thermostat. Putting in Honeywell CT3500 Programmable. Have Red, Green, Yellow, Blue, White. AC works but no heat. Thermostat came with R jumpered to Rc. How do I wire this to get AC and heat? Thank you. I need to also explain that I did put the appropriate wires...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
